| Drawing | Hole | Location | Tube number | Notes |
| Treatment at floor | ||||
| - | - | Engine compartment lid | 1 | Remove plug, Pull covering away |
| A 1 | 
| Front cross member | 1 | |
| A 2 |
| Front mudguards, front section | 1 | |
| B 3 |
| Front mudguards | 1 | Remove inner mudguard |
| B 4 |
| Reinforcement in front mudguards, front section | 1 | Spray from engine compartment |
| C 5 |
| Reinforcement in front mudguards, rear section | 1 | |
| C 6 |
| Torpedo | 1 | Close air vents C6 and D6 |
| D 7 |
| Front door post | 1 | Remove plug or socket |
| D 8 |
| Doors, front section | 3+1 | Remove plug |
| E 9 |
| Doors | 3+4 | Remove reflector (The Coupe scheme recommends to drill and protect through an additional hole) |
| F 10 |
| Side panels | 1 | Remove plug |
| G 11 |
| Rear side panels | 1 | |
| G 12 |
| Rear valances | 1 | Remove luggage compartment floor sheet |
| G 13 |
| Rear cross member | 1 | Lift covering |
| H 14 | 
| Boot lid | 1 | |
| Treatment at lift | ||||
| J 15 |
| Forward cross member | 1 | |
| J 16 |
| Forward side rails | 6 or1 | |
| J 17 |
| Subframe | 1 | |
| J 18 |
| Cross reinforcement | 6 | Remove plugs |
| J 19 |
| Tunnel reinforcement | 1 | Remove large plug. Do not spray upwards |
| J 20 |
| side rails | 5 or 6 | Remove plugs |
| J 21 |
| Valances under doors | 6 | Remove plug |
| J 22 |
| Jack mount | 1 | |
| J 23 |
| Rear side rails | 6 | Remove plug. Forward spray |
| J 24 |
| Rear skirt | 1 | |
See general instructions for symbols etc..
Last update 22.2.2006